Optimized with a special coating that is ideal for eco-solvent ink printing, this 135 gsm solvent glossy paper has a permanent, water-based acrylic adhesive that is backed with a silicone treated release liner. A productive and cost-effective solution for mounted graphics, it also achieves excellent results for print and cut graphics applications.
Solvent Glossy Paper with Adhesive is multicoated to be water and scratch-resistant and has superior white point and gloss level. Compatible with Roland DG SOLJET, VersaArt, VersaCAMM, VersaStudio, TrueVIS and VersaUV printers.
Photobase paper should be handled with care before and after printing to prevent surface contamination that may spoil the print. The paper should be processed in an environment of 65°-85° F (18°-30°C) and 40-70% relative humidity (non-condensing) that is clean and relatively dust-free. Also, some media are affixed strongly to the core and care should be taken to avoid machine issues due to the non-release of media at the end of the roll. Store this product in its original packaging in a cool dry area until ready for processing. If storage conditions are outside the recommended operating ranges, allow the paper to acclimate in the specified range for at least 24-48 hours before use. A heat assist of 30-35° C (86-95° F) is helpful with this product, but care should be taken not to heat the paper too aggressively.