(800) 967-3929


GraphiCut driver for ProDeSIGN

Newer revisions of ProDeSIGN have a utility in the root directory of the CD with 3 files named newplotter1, newplotter2, and newplotter3. Depending onn which version of prodesign you have (level I, II, or III) double click on newplotter 1,2,or3, and this will load the GraphiCut driver into the ProDeSIGN plotter list. Skip to step 2.

If these do not exist on the CD, then follow the following instructions:

1) Download the driver. Right Click Here, and select Save Target As. Copy it to the OutputDrivers folder of the ProDeSIGN software (ie: c:\Program Files\ProDeSIGN 3 7.5v5\OutputDrivers)

2) Open the Production Manager in ProDeSIGN click SETUP>ADD SETUP

Click SETUP>ADD SETUP

Select the GraphiCut Driver and click

click

Select the port and click .

(If you are using the serial cable included, most likely it will be COM1. If you are using the USB convertor, then it will most likely be COM3)

Once the driver is loaded, select it and click SETUP>DEFAULT JOB PROPERTIES

Click on the cutter tab (3rd from the left), and check the box next to Knife Offset. Enter .013 in the dialog box to the right, then click the OK button.

The GraphiCut plotter should be ready to use.

 

Click here to e-mail us with questions or suggestions for future articles.

Send To Printer


Call us TOLL FREE  1-800-967-3929

Home Plotters Printers Used Equipment Engravers Software Vinyl Film Application Tape Internet Specials
Plotter Supplies
Printing Supplies Only@Ordway's Exclusives Vinyl Lettering Services Digital Printing Services
Complete Catalog Leasing Information FAQ's / Tech Support Directions to our Store About Us Secure Order Form
Heat Transfer Materials Roland InkJet Media and Ink ColorCamm Supplies


Ordway Sign Supply, Inc.   16201 Vanowen St.   Van Nuys, CA 91406
(818) 908-9666   (800) 967-3929   Fax (818) 908-9673
e-mail -
Pete@SignSupply.com