(800) 967-3929

SignLab "Error locating security device"
with Windows XP

HASP Security Device (Dongle) Driver 

The HASP type security devices require a driver so that the dongle can be detected. Periodically, a new 
driver is developed by Aladdin Knowledge Systems (manufacturer of the HASP). The version of driver 
provided here is 4.65. It is compatible with all Windows operating systems from Windows 95 up to and 
including Windows 2000 and Windows XP

To ensure that the driver is installed correctly, you must read and follow the instructions below: 

To download the latest hasp driver, click here, or here, and run.

(If you get a windows security warning, select run again) then click OK, and UNZIP, and OK, and CLOSE winzip.

Remove the dongle from the computer.

Click on the START button, and RUN.

At the prompt, type c:\HASP and press enter. There will be a prompt saying that it was uninstalled successfully. Click OK.

The next prompt will say the operation was completed successfully. Click OK

Reboot the computer when it is finished.

Replace the dongle when the computer has rebooted.

Check the Device Manager to ensure that the dongle is recognized by the computer.

Back    Send To Printer


Home Plotters Printers Used Equipment Engravers Software Vinyl Film Application Tape Internet Specials
Plotter Supplies
Printing Supplies Only@Ordway's Exclusives Vinyl Lettering Services Digital Printing Services
Complete Catalog Financial Services FAQ's / Tech Support Directions to our Store About Us Secure Order Form
Heat Transfer Materials Roland InkJet Media and Ink ColorCamm Supplies


Ordway Sign Supply, Inc.   16201 Vanowen St.   Van Nuys, CA 91406
(818) 908-9666  Fax (818) 908-9673
e-mail us -
click here